Sign In | Join Free | My entremaqueros.com
China BEST PIPELINE EQUIPMENT CO.,LTD logo
BEST PIPELINE EQUIPMENT CO.,LTD
Your one stop shop for all your piping needs such as Seamless & Welded Carbon / Stainless & Alloy Steel Pipes, Mainly alloy Steel Pipes , Forged Flanges, Butt Weld Fittings, Forged Fittings,
Verified Supplier

6 Years

Home > Slip on Plate Flange >

X2CrNiMoN17-11-2 wn flanges EN 10222-5 Large dimension ASME B16.5 stainless steel 1.4406 forged flange

BEST PIPELINE EQUIPMENT CO.,LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

X2CrNiMoN17-11-2 wn flanges EN 10222-5 Large dimension ASME B16.5 stainless steel 1.4406 forged flange

Material : X2CrNiMoN17-11-2

Steel Number : 1.4406

Type : Stainless Steel flanges

Standard : EN 10222-5

Contact Now

Grade : X2CrNiMoN17-11-2
Number: 1.4406
Classification: Austenitic stainless steel
Density: 8 g/cm ³
Standard:
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels
EN 10222-5: 2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10272: 2007 Stainless steel bars for pressure purposes
EN 10250-4: 2000 Open steel die forgings for general engineering purposes. Stainless steels
EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10088-4: 2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

Chemical composition % of steel X2CrNiMoN17-11-2 (1.4406): EN 10088-2-2005
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn Ni P S Cr Mo N
max 0.03 max 1 max 2 10 - 12.5 max 0.045 max 0.015 16.5 - 18.5 2 - 2.5 0.12 - 0.22


Mechanical properties of steel X2CrNiMoN17-11-2 (1.4406)
Rm - Tensile strength (MPa) (+A) 580-800
Rp0.2 0.2% proof strength (MPa) (+A) 280-315
KV - Impact energy (J) transverse, (+A) +20°
60
-196°
60
KV - Impact energy (J) longitud., (+A) +20°
100
A - Min. elongation at fracture (%) (+A) 30-40
A - Min. elongation at fracture (%) longitud., (+AT) 45
Brinell hardness (HB): (+A) 250


Properties of steel X2CrNiMoN17-11-2 (1.4406)
Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Steel shal not be applied at a metal temperature lower than -270 ° C

Equivalent grades of steel X2CrNiMoN17-11-2 (1.4406)
EU
EN
USA
-
Japan
JIS
France
AFNOR
England
BS
X2CrNiMoN17-11-2
316LN
SUS316LN
316S61
Z3CND17-11Az
316S61

 X2CrNiMoN17-11-2 wn flanges EN 10222-5 Large dimension ASME B16.5 stainless steel 1.4406 forged flange Manufactures

X2CrNiMoN17-11-2 wn flanges EN 10222-5 Large dimension ASME B16.5 stainless steel 1.4406 forged flange Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: BEST PIPELINE EQUIPMENT CO.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2024 entremaqueros.com. All rights reserved.